Fabricated Plywood Cases   2007-10-14 SCS Cases Fabricated cases:  Are a perfect choice when none of the other cases fit the bill. These cases are assembled one at a time using many different choices of substrate (wall material) ¼", 3/8", ½" plywood, or honeycomb polyethylene plastic, depending on requirement or budget. Fabricated cases are custom made to address the specific needs of the customer. We start off by measuring the equipment going into the case, and then discuss how the customer intends on using the case to come up with the final configuration.  We then go to work choosing the proper materials and hardware options to make the case best suit the requirements. We focus on mobility, security and ease of use when coming up with a case solution. All of our fabricated cases meet or exceed the ATA 300 specification, Category 1, which basically means that these cases can be shipped by all types of common carriers and survive a minimum of 100 round-trips while still being functional. Turn around time on these types of cases is usually 2-3 weeks once the configuration is agreed upon.   Return to Overview