Hardigg Single Lid Cases

With over 300 standard sizes, Hardigg's line of single-lid, rotomolded transport cases is the industry leader. We have a case to ship and protect virtually any industrial, commercial, scientific, or military equipment - computers, tools, electronics, demos, audio, medical, etc. Hardigg's reusable single-lid cases are both lightweight and incredibly rugged, because we use the best polyethylene molding processes - and we engineer them ourselves.

We offer single-lid cases compliant with ATA and MIL-SPEC requirements for your shipping needs, and you can count on a Hardigg portable transport case to be lightweight yet heavy-duty, low-maintenance-cost units, and reusable for many years. Every element is designed to maximize reliability, strength, and protection.

Features and Standard Options

• Reinforced corners and edges. These high-stress areas are 15 to 20% thicker than the walls, to provide strength where it's most needed.
• Permanent, uniform colors throughout walls. The color can't be peeled off or scraped away because it is molded throughout.
• Molded-in corrugations. This design feature provides utmost columnar strength for stacking and protection during transport.
• Molded-in male/female stacking ribs. This feature allows you to stack numerous single lid cases easily and with confidence.
• Positive anti-shear locks. Hardigg's patented locks effectively prevent case lids from separating from bases on impact - plus they minimize stress on hardware.
• Molded-in tongue-in-groove gasketed parting lines. The case seals tight, because the parting line is molded in. Even after an impact, the polyethylene shell will return to its original configuration without violating the seal.
• Recessed latches and hinges. This feature means your hardware is fully protected from impact or other damage.
• Low-profile wing-turn catches. These are both lightweight and high strength.
• Molded-in metal inserts for catch and hinge attachment points. Hardigg's patented metal inserts provide strength at the attachment points for the catches and latches and spread the load from the hardware to the container wall.
• Comfort Grip Handles. Our patented heavy-duty plastic handles are standard on most cases. These injection-molded polyethylene handles are the industry's easiest to grasp: they feature a larger and more comfortable grip and rustproof HDPE, plus they're recyclable and weigh 33% less than other handles. Hardigg Comfort Grip Handles are available in two sizes - the Model 75 (U.S. Patent pending), which is rated to 75 lbs. per handle, and the Model 150 (U.S. Patent #5461755,D362805), which is rated to 150 lbs. Model 150 has a 90° stop, while the Model 75 has a non-integral stop.

Custom Single Lid Case Applications

All Hardigg single lid cases can be customized to fit your exact requirements. Our Design Staff will work closely with you taking both environmental factors and product fragility into consideration when designing your case. From simple foam cushions to sophisticated shock isolated floating aluminum decks, the Hardigg single lid case is an excellent choice for custom case applications.

Custom Applications include:

• Water Jet cut foam cushions
• Die cut foam cushions
• Cutting holes in the case exterior for mounting cables or other items
• Add Stenciling or Graphics to case exterior
• Fire Retardant additives
• Custom case colors
• Aluminum floating deck mounts
  

Optional Items

	Airtight case system This includes a PRV (pressure relief valve) and gasketing hardware to safely maintain correct pressure differential. Manual release button is recessed below cover rim. Test pressure range is +/- 0.25 PSID (18 mb).
	All-catch Case hinges are replaced with wing/turn catch-strike pairs, allowing lid to be completely removed. No charge for this option. [Note: some cases available only as all-catch.]
	Card holder Metal holder for shipping-card riveted to the exterior of case. Two sizes: 2-3/8" x 5-3/8" (60 x 136 mm) and 4" x 6" (102 x 152 mm).
	Caster sets - removable or fixed Available in sets of four, these are attached with rugged mounting hardware or with Hardigg's FastClip? mounting plate system for removable applications.
	Edge casters These rugged caster assemblies are installed along a bottom edge of a single lid case to permit wheeled movement of the case in a cart-like fashion. Each heavy-duty caster wheel is in a durable cast aluminum housing uniquely designed to resist impact and rough handling abuse. Not available on all case sizes.
	Foam cushioning Hardigg cushioning systems are available in polyethylene (firmer) and polyurethane (softer) foams. Antistatic versions are also available. We offer foam-filled (with separate layers of 1" or 2" foam) and foam-lined (either 1" or 2" depth) systems. In addition, Hardigg will customize foam cushioning systems, with multiple cavities, to provide maximum protection and stability. Hardigg's state-of-the-art water jet foam cutting system provides customers with precisely manufactured and repeatable cushions - plus fast turnaround.
	Forklift provisions/Skid-Runners These one-piece molded Skid-Runners provide clearance for forklift tines and pallet jacks.
	Handles Our patented, heavy-duty Hardigg Comfort Grip Handles are the industry's easiest to hold. These polyethylene molded handles are available in two sizes - the Model 75, which is rated to 75 lbs. per handle, and the Model 150, which is rated to 150 lbs. Model 150 has a 90° stop, while the Model 75 has a non-integral stop. Extra 90°-stop metal handles are also available, mounted to your request. These are available in zinc-plate yellow-chromate or stainless steel.
	Humidity indicator Indicates 20%, 30%, and 40% relative humidity ranges. Three part face changes color when inside humidity exceeds the indicated level. As humidity decreases, the indicator resets for future use. Recommended for airtight cases only.
	ID plates I.A.W. MIL-P-15024, Type H, Style IV, Size 10.4" x 4" x .020" (102 x 102 x 0.5 mm) thick aluminum, fastener attached to your case. Text font is News Gothic Bold.
	Labels - ATA Standard ATA container label set complies with Specification 300 Category 1.
	Labels - front To assure that lids are replaced in the proper orientation. A set of two "front" labels are affixed to the case, one on the base and one on the lid, in the latch wells.
	Labels - standard Each label set includes: Delicate Unit, Handle with Care, and Up Arrows.
	Lifting/tie-down rings These welded rings provide hoisting and tie-down attachment points with 2" diameter clearance for hooks. They're spring-loaded and pivot 180°. Available in plated steel or stainless steel.
	Locking cable/hasp Allows the case to be padlocked shut. Cable is tamper-resistant aircraft steel. [Padlock not included].
	Reverse application The orientation of the case is reversed: the lid becomes the base and vice versa. The lid has stacking indents instead of stacking ribs. No charge for this option.
	Stainless hardware Recommended for applications where the standard zinc-plate or zinc alloy finishes are unsuitable, such as excessive saltwater or chemical environments.
	Molded-in Graphics This allows for a company logo or other information to be actually molded-in to the case. The artwork becomes an actual integrated part of the case and is not removable. Requires camera ready artwork and minimum quantities do apply.
	Stencil - epoxy or polyrollmark Per MIL-I-43553. Available in black, white, and yellow, depending on the color of the case itself. One ink color per case.
	Valve - fill Supplied with an inner tube valve core, recommended for pressurization of case. Housing and cap are black anodized aluminum alloy. Recommended for use with Purge Valve option.
	Valve - purge Manual Pressure equalization or air relief. Recommended for use with the Fill Valve option.

Hardigg Single Lid Case Size List